Welcome!

Java IoT Authors: Liz McMillan, Elizabeth White, Thanh Tran, Nate Vickery, Pat Romanski

Related Topics: Containers Expo Blog, Industrial IoT, Microservices Expo, IoT User Interface, @CloudExpo, Apache

Containers Expo Blog: Blog Feed Post

Bare Metal Blog: FPGAs - The Benefits and Risks

The use of FPGAs, the risks, trade-offs, and benefits to IT

I was talking with the team working on our yard – they’re putting in new sidewalks and a patio, amongst other things – and we got on the subject of gutters. When we bought this house, it came with no gutters, and that has, over time, caused some serious damage to the base of the house. Wood and plaster do not take it well when water pours down on them at the rate that, oh, say melting snow in the spring sends it down. So I had them get us an estimate for gutters on the entire house. Some of the work they’re estimating is running the gutters right to the storm drain, which is not normally cheap, but they had both the front and back yards all ripped up, so it is a good time to do it, both cheaper and less messy, since the mess is already there.

imageSo I told them to do it, because I don’t want the sod they’re going to lay to be ripped up in a year when we decide to put the gutters on, and certainly don’t want them to rip up the patio and sidewalks they’re putting in now just to lay pipe later – that would be nearly impossible.

And that, in a nutshell, is the same reason why FPGAs are used in a lot of high-tech firms. If the device is my yard/sidewalks, and I have to choose between a custom ASIC versus an FPGA, the custom ASIC would require me to rip up the yard later, while the FPGA is planning ahead for change.

Sidewalk with pipes under itLet me explain. With an FPGA, the circuits are programmed. Not like software, but code sets up the circuits, and then they are pretty equivalent to having them be hard-wired. With an ASIC, they really are hard-wired. So six months later, a change to the system – be it added functionality or fixes to existing logic – will be far easier with an FPGA than an ASIC. With an FPGA, the design file is opened, the changes made and tested, then the config is compiled and delivered to manufacturing. At that point, the devices produced with the new config file will have the new functionality. With ASICs, you change the design, send it to a manufacturing shop, wait for the shop to produce a small run (working it into their schedule that is), test the result, and then do a full production run. Then the new ASIC has to be put on the assembly line to replace the old ASIC. The difference is astronomical in terms of time required and even more so in terms of cost.

Of course there are some trade-offs. Every architectural choice results in trade-offs, and anyone who tells you differently is indeed trying to sell you something, and they don’t want to admit the trade-offs used to produce what they’re selling.

One of the big concerns out there about FPGAs is that they’re less secure. In the most vague, general sense, this is true. But in practical use scenarios, it most certainly isn’t. Here are the concerns, and why they’re over-rated (note that these notes are adapted from responses to my questions put to Clint Harames of F5<’s most excellent FPGA team, I cannot vouch for other production except to say the other teams I was involved with outside of F5 were similar):

  • It’s field programmable! What if it gets modified? In F5’s case, none of the programmability is accessible from the outside. There is no Ethernet or coding hack that can reprogram it, because that functionality is not accessible. Other vendors work to a differing standard, so definitely worth checking, though I would remind you that it is almost never going to be as easy to hack an FPGA as it is to hack software or COTS hardware.
  • Okay, but can’t it be erased and destroy the device? In theory yes (though erasing it is only effective until the next boot – non-destructive, so-to-speak), but if “modify” functionality is not accessible, then it can’t be erased easily. The caveat is that there is of course a reset pin on the chip, but if the ne’er-do-well has physical access to your device, time to disassemble the device, and a handy pinout for the FPGA chip you’re using, I’m going to guess you have bigger problems than whether they can reset your FPGA.
  • If it’s programmable, can’t the program be read out and modified? Again, that functionality can be enabled on the chip, and you can check with your device manufacturer to see if they leave it enabled for production devices. Remember, it is a twofold story here, in F5’s case, we don’t generally want to reprogram production devices and don’t want to make reverse engineering our product any easier than it has to be, while we want to protect you from someone modifying a production device. So when the design is done and meets all test criteria, we at F5 turn access to this functionality off completely before shipping product is produced. Definitely worth checking with your vendor to find out what they are doing.

Again, your vendor may do things differently, if, for some reason they need the ability to reprogram the FPGA in your device.

For you, the IT staffer, the benefits are pretty straight-forward. The device you purchase will be closer to “up to date” because of the time-to-market benefits of FPGAs, it will be cheaper because of the reduced up-front costs (note that like everything involving costs, economies of scale can change the “cheaper” part to be untrue, depending upon the costs involved), and the resulting device will be far, far faster than the equivalent processing done on a general purpose CPU. In the end, it is hardware doing the processing, and FPGAs have concurrency that general purpose CPUs can only match with a huge number of cores, even then since the OS handles the scheduling on a general purpose CPU, many cores does not normally make up the performance difference.

There are some who think the advent of virtualization and virtualized appliances should curb the use of FPGAs, as the virtual version has to include all the functionality. While this is, on the surface, a reasonable argument, it has a flaw. FPGAs are MUCH faster than software will ever be, let alone a VM running on a host with who-knows-how-many other VMs sharing its resources. So in cases like F5, where there is a hardware and a software version, the key is to be able to run in both. TMOS, F5’s OS for traffic management, uses hardware if available, software if not. This offers the best of both worlds – acceptable traffic management in a VM, and high-performance traffic management in hardware.

Next time I’ll delve into specific functionality that on our hardware platforms is implemented in FPGA, and how that helps you do your job in IT, today was more of a “what are the risks, what are the benefits” in a generic sense.

Read the original blog entry...

More Stories By Don MacVittie

Don MacVittie is currently a Senior Solutions Architect at StackIQ, Inc. He is also working with Mesamundi on D20PRO, and is a member of the Stacki Open Source project. He has experience in application development, architecture, infrastructure, technical writing, and IT management. MacVittie holds a B.S. in Computer Science from Northern Michigan University, and an M.S. in Computer Science from Nova Southeastern University.

@ThingsExpo Stories
SYS-CON Events announced today that Tintri Inc., a leading producer of VM-aware storage (VAS) for virtualization and cloud environments, will exhibit at the 18th International CloudExpo®, which will take place on June 7-9, 2016, at the Javits Center in New York City, New York, and the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
In his session at 18th Cloud Expo, Bruce Swann, Senior Product Marketing Manager at Adobe, will discuss how the Adobe Marketing Cloud can help marketers embrace opportunities for personalized, relevant and real-time customer engagement across offline (direct mail, point of sale, call center) and digital (email, website, SMS, mobile apps, social networks, connected objects). Bruce Swann has more than 15 years of experience working with digital marketing disciplines like web analytics, social med...
A strange thing is happening along the way to the Internet of Things, namely far too many devices to work with and manage. It has become clear that we'll need much higher efficiency user experiences that can allow us to more easily and scalably work with the thousands of devices that will soon be in each of our lives. Enter the conversational interface revolution, combining bots we can literally talk with, gesture to, and even direct with our thoughts, with embedded artificial intelligence, wh...
SYS-CON Events announced today that EastBanc Technologies will exhibit at SYS-CON's 18th International Cloud Expo®, which will take place on June 7-9, 2016, at the Javits Center in New York City, NY. EastBanc Technologies has been working at the frontier of technology since 1999. Today, the firm provides full-lifecycle software development delivering flexible technology solutions that seamlessly integrate with existing systems – whether on premise or cloud. EastBanc Technologies partners with p...
The IoTs will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform. In his session at @ThingsExpo, Craig Sproule, CEO of Metavine, will demonstrate how to move beyond today's coding paradigm and share the must-have mindsets for removing complexity from the development proc...
SYS-CON Events announced today BZ Media LLC has been named “Media Sponsor” of SYS-CON's 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. BZ Media LLC is a high-tech media company that produces technical conferences and expositions, and publishes a magazine, newsletters and websites in the software development, SharePoint, mobile development and Commercial Drone markets.
SYS-CON Events announced today that ContentMX, the marketing technology and services company with a singular mission to increase engagement and drive more conversations for enterprise, channel and SMB technology marketers, has been named “Sponsor & Exhibitor Lounge Sponsor” of SYS-CON's 18th Cloud Expo, which will take place on June 7-9, 2016, at the Javits Center in New York City, New York. “CloudExpo is a great opportunity to start a conversation with new prospects, but what happens after the...
SYS-CON Events announced today that Alert Logic, Inc., the leading provider of Security-as-a-Service solutions for the cloud, will exhibit at SYS-CON's 18th International Cloud Expo®, which will take place on June 7-9, 2016, at the Javits Center in New York City, NY. Alert Logic, Inc., provides Security-as-a-Service for on-premises, cloud, and hybrid infrastructures, delivering deep security insight and continuous protection for customers at a lower cost than traditional security solutions. Ful...
SYS-CON Events announced today that MangoApps will exhibit at SYS-CON's 18th International Cloud Expo®, which will take place on June 7-9, 2016, at the Javits Center in New York City, NY. MangoApps provides modern company intranets and team collaboration software, allowing workers to stay connected and productive from anywhere in the world and from any device. For more information, please visit https://www.mangoapps.com/.
WebRTC is bringing significant change to the communications landscape that will bridge the worlds of web and telephony, making the Internet the new standard for communications. Cloud9 took the road less traveled and used WebRTC to create a downloadable enterprise-grade communications platform that is changing the communication dynamic in the financial sector. In his session at @ThingsExpo, Leo Papadopoulos, CTO of Cloud9, will discuss the importance of WebRTC and how it enables companies to fo...
The IoT is changing the way enterprises conduct business. In his session at @ThingsExpo, Eric Hoffman, Vice President at EastBanc Technologies, discuss how businesses can gain an edge over competitors by empowering consumers to take control through IoT. We'll cite examples such as a Washington, D.C.-based sports club that leveraged IoT and the cloud to develop a comprehensive booking system. He'll also highlight how IoT can revitalize and restore outdated business models, making them profitable...
IoT generates lots of temporal data. But how do you unlock its value? How do you coordinate the diverse moving parts that must come together when developing your IoT product? What are the key challenges addressed by Data as a Service? How does cloud computing underlie and connect the notions of Digital and DevOps What is the impact of the API economy? What is the business imperative for Cognitive Computing? Get all these questions and hundreds more like them answered at the 18th Cloud Expo...
SYS-CON Events announced today the How to Create Angular 2 Clients for the Cloud Workshop, being held June 7, 2016, in conjunction with 18th Cloud Expo | @ThingsExpo, at the Javits Center in New York, NY. Angular 2 is a complete re-write of the popular framework AngularJS. Programming in Angular 2 is greatly simplified. Now it’s a component-based well-performing framework. The immersive one-day workshop led by Yakov Fain, a Java Champion and a co-founder of the IT consultancy Farata Systems and...
Customer experience has become a competitive differentiator for companies, and it’s imperative that brands seamlessly connect the customer journey across all platforms. With the continued explosion of IoT, join us for a look at how to build a winning digital foundation in the connected era – today and in the future. In his session at @ThingsExpo, Chris Nguyen, Group Product Marketing Manager at Adobe, will discuss how to successfully leverage mobile, rapidly deploy content, capture real-time d...
SYS-CON Events announced today that BMC Software has been named "Siver Sponsor" of SYS-CON's 18th Cloud Expo, which will take place on June 7-9, 2015 at the Javits Center in New York, New York. BMC is a global leader in innovative software solutions that help businesses transform into digital enterprises for the ultimate competitive advantage. BMC Digital Enterprise Management is a set of innovative IT solutions designed to make digital business fast, seamless, and optimized from mainframe to mo...
What a difference a year makes. Organizations aren’t just talking about IoT possibilities, it is now baked into their core business strategy. With IoT, billions of devices generating data from different companies on different networks around the globe need to interact. From efficiency to better customer insights to completely new business models, IoT will turn traditional business models upside down. In the new customer-centric age, the key to success is delivering critical services and apps wit...
Join us at Cloud Expo | @ThingsExpo 2016 – June 7-9 at the Javits Center in New York City and November 1-3 at the Santa Clara Convention Center in Santa Clara, CA – and deliver your unique message in a way that is striking and unforgettable by taking advantage of SYS-CON's unmatched high-impact, result-driven event / media packages.
In his keynote at 18th Cloud Expo, Andrew Keys, Co-Founder of ConsenSys Enterprise, will provide an overview of the evolution of the Internet and the Database and the future of their combination – the Blockchain. Andrew Keys is Co-Founder of ConsenSys Enterprise. He comes to ConsenSys Enterprise with capital markets, technology and entrepreneurial experience. Previously, he worked for UBS investment bank in equities analysis. Later, he was responsible for the creation and distribution of life ...
SYS-CON Events announced today that MobiDev will exhibit at SYS-CON's 18th International Cloud Expo®, which will take place on June 7-9, 2016, at the Javits Center in New York City, NY. MobiDev is a software company that develops and delivers turn-key mobile apps, websites, web services, and complex software systems for startups and enterprises. Since 2009 it has grown from a small group of passionate engineers and business managers to a full-scale mobile software company with over 200 develope...
SoftLayer operates a global cloud infrastructure platform built for Internet scale. With a global footprint of data centers and network points of presence, SoftLayer provides infrastructure as a service to leading-edge customers ranging from Web startups to global enterprises. SoftLayer's modular architecture, full-featured API, and sophisticated automation provide unparalleled performance and control. Its flexible unified platform seamlessly spans physical and virtual devices linked via a world...