|By Don MacVittie||
|January 20, 2013 10:00 AM EST||
When you purchase a high-end storage array, it is not generally advised that you half fill the racks and then forget about it, purchasing a new empty rack to fill when next you need high-end storage.
Knowing how the firmware is configured on a BIG-IP, we can chat about some of the more interesting aspects of hardware, firmware, and devices overall. One of the truly interesting bits to me is the proclivity of many organizations to purchase a high-end, bladed ADC system and not fill the rack. I remember way back in the day when my cohorts in the networking and storage (FC SAN) spaces had to worry about the backplane on a switch and how much it could actually handle compared to the sum of the ports you could put on the front. But that isn’t as much a concern with ADCs (or much of anything else these days), purpose-built devices tend to have plenty of bandwidth on the backplane, and you don’t buy an ADC based off of commoditized hardware that you expect to drop blades into.
But there are a reasonably large number of organizations that have purchased a bladed ADC and then either done nothing more with it than the original purpose, or gone out and bought separate ADCs (normally from the same vendor!) to do new tasks.
And the question there is… Are you really maximizing your infrastructure that way?
We are going through a whole cycle of storage consolidation because our storage needs were met in this manner. There was corporate storage, divisional storage, departmental storage, and in many places team storage, all growing at the same time with no oversight and lots of “we’re completely out of space” at one level while another was overflowing.
We, as an industry, need to apply the lessons learned there to our usage of ADCs. Sure, you might have purchased that blade rack for project X, but when you kick off project Y, do you really want to purchase all new hardware, or could you drop a couple of new blades into the rack and use any of the methods various vendors offer to partition off those blades as separate entities? Of course you could. And it would normally be more economically feasible. Of course there are cases where you can show going a different route might cost less, but there are some other considerations to be made. Like power consumption of a whole new device versus a blade, and management of a whole new device versus another interface on an existing device, and of course the cost of setting up and configuring a whole new device versus utilizing the configuration already in place for the other blades and modifying it.
From the F5 perspective, we have attempted to minimize the pain of an all-new configuration with iApps, a very cool feature that handles the details for you, but they won’t initially configure the device, and blades will do a lot of that configuration for you. Indeed, if you are just expanding the capacity of an existing environment, that is automatic. Only if you’re doing new things – new apps, new ADC functionality, new segmentation – do you have to do configuration. If you’re not an F5 customer, you can of course check with your vendor, but I’m willing to bet you’ll have less work putting blades into existing chassis.
And don’t forget that a modern ADC is capable of doing a lot of things. If you’re looking for new LAN/WAN/security/application delivery functionality, check into what can go into your ADC rack while you’re looking at other options. It is entirely possible that the ADC you have could perform the functionality you need, with a single (or simplified) management interface, leaving staff more time to deal with the 10 million other issues that come up in an IT shop in the course of a year. If your ADC is underutilized, it might just be possible that you could start using your ADC for the given purpose with just a license key, saving even more time, and likely some money too.
The Transparent Cloud-computing Consortium (abbreviation: T-Cloud Consortium) will conduct research activities into changes in the computing model as a result of collaboration between "device" and "cloud" and the creation of new value and markets through organic data processing High speed and high quality networks, and dramatic improvements in computer processing capabilities, have greatly changed the nature of applications and made the storing and processing of data on the network commonplace.
Sep. 29, 2016 04:00 AM EDT Reads: 1,204
Almost two-thirds of companies either have or soon will have IoT as the backbone of their business in 2016. However, IoT is far more complex than most firms expected. How can you not get trapped in the pitfalls? In his session at @ThingsExpo, Tony Shan, a renowned visionary and thought leader, will introduce a holistic method of IoTification, which is the process of IoTifying the existing technology and business models to adopt and leverage IoT. He will drill down to the components in this fra...
Sep. 29, 2016 04:00 AM EDT Reads: 1,802
SYS-CON Events announced today that ReadyTalk, a leading provider of online conferencing and webinar services, has been named Vendor Presentation Sponsor at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. ReadyTalk delivers audio and web conferencing services that inspire collaboration and enable the Future of Work for today’s increasingly digital and mobile workforce. By combining intuitive, innovative tec...
Sep. 29, 2016 03:30 AM EDT Reads: 3,027
I'm a lonely sensor. I spend all day telling the world how I'm feeling, but none of the other sensors seem to care. I want to be connected. I want to build relationships with other sensors to be more useful for my human. I want my human to understand that when my friends next door are too hot for a while, I'll soon be flaming. And when all my friends go outside without me, I may be left behind. Don't just log my data; use the relationship graph. In his session at @ThingsExpo, Ryan Boyd, Engi...
Sep. 29, 2016 03:30 AM EDT Reads: 1,374
SYS-CON Events announced today that Pulzze Systems will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Pulzze Systems, Inc. provides infrastructure products for the Internet of Things to enable any connected device and system to carry out matched operations without programming. For more information, visit http://www.pulzzesystems.com.
Sep. 29, 2016 03:15 AM EDT Reads: 1,905
IoT offers a value of almost $4 trillion to the manufacturing industry through platforms that can improve margins, optimize operations & drive high performance work teams. By using IoT technologies as a foundation, manufacturing customers are integrating worker safety with manufacturing systems, driving deep collaboration and utilizing analytics to exponentially increased per-unit margins. However, as Benoit Lheureux, the VP for Research at Gartner points out, “IoT project implementers often ...
Sep. 29, 2016 03:15 AM EDT Reads: 3,571
There is growing need for data-driven applications and the need for digital platforms to build these apps. In his session at 19th Cloud Expo, Muddu Sudhakar, VP and GM of Security & IoT at Splunk, will cover different PaaS solutions and Big Data platforms that are available to build applications. In addition, AI and machine learning are creating new requirements that developers need in the building of next-gen apps. The next-generation digital platforms have some of the past platform needs a...
Sep. 29, 2016 03:00 AM EDT Reads: 1,861
If you’re responsible for an application that depends on the data or functionality of various IoT endpoints – either sensors or devices – your brand reputation depends on the security, reliability, and compliance of its many integrated parts. If your application fails to deliver the expected business results, your customers and partners won't care if that failure stems from the code you developed or from a component that you integrated. What can you do to ensure that the endpoints work as expect...
Sep. 29, 2016 02:45 AM EDT Reads: 1,717
As ridesharing competitors and enhanced services increase, notable changes are occurring in the transportation model. Despite the cost-effective means and flexibility of ridesharing, both drivers and users will need to be aware of the connected environment and how it will impact the ridesharing experience. In his session at @ThingsExpo, Timothy Evavold, Executive Director Automotive at Covisint, will discuss key challenges and solutions to powering a ride sharing and/or multimodal model in the a...
Sep. 29, 2016 02:30 AM EDT Reads: 515
Is your aging software platform suffering from technical debt while the market changes and demands new solutions at a faster clip? It’s a bold move, but you might consider walking away from your core platform and starting fresh. ReadyTalk did exactly that. In his General Session at 19th Cloud Expo, Michael Chambliss, Head of Engineering at ReadyTalk, will discuss why and how ReadyTalk diverted from healthy revenue and over a decade of audio conferencing product development to start an innovati...
Sep. 29, 2016 02:30 AM EDT Reads: 2,174
WebRTC adoption has generated a wave of creative uses of communications and collaboration through websites, sales apps, customer care and business applications. As WebRTC has become more mainstream it has evolved to use cases beyond the original peer-to-peer case, which has led to a repeating requirement for interoperability with existing infrastructures. In his session at @ThingsExpo, Graham Holt, Executive Vice President of Daitan Group, will cover implementation examples that have enabled ea...
Sep. 29, 2016 02:00 AM EDT Reads: 1,590
SYS-CON Events announced today that Numerex Corp, a leading provider of managed enterprise solutions enabling the Internet of Things (IoT), will exhibit at the 19th International Cloud Expo | @ThingsExpo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Numerex Corp. (NASDAQ:NMRX) is a leading provider of managed enterprise solutions enabling the Internet of Things (IoT). The Company's solutions produce new revenue streams or create operating...
Sep. 29, 2016 01:45 AM EDT Reads: 2,057
Fifty billion connected devices and still no winning protocols standards. HTTP, WebSockets, MQTT, and CoAP seem to be leading in the IoT protocol race at the moment but many more protocols are getting introduced on a regular basis. Each protocol has its pros and cons depending on the nature of the communications. Does there really need to be only one protocol to rule them all? Of course not. In his session at @ThingsExpo, Chris Matthieu, co-founder and CTO of Octoblu, walk you through how Oct...
Sep. 29, 2016 01:00 AM EDT Reads: 2,306
"My role is working with customers, helping them go through this digital transformation. I spend a lot of time talking to banks, big industries, manufacturers working through how they are integrating and transforming their IT platforms and moving them forward," explained William Morrish, General Manager Product Sales at Interoute, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Sep. 28, 2016 11:30 PM EDT Reads: 3,971
According to Forrester Research, every business will become either a digital predator or digital prey by 2020. To avoid demise, organizations must rapidly create new sources of value in their end-to-end customer experiences. True digital predators also must break down information and process silos and extend digital transformation initiatives to empower employees with the digital resources needed to win, serve, and retain customers.
Sep. 28, 2016 09:15 PM EDT Reads: 376
In this strange new world where more and more power is drawn from business technology, companies are effectively straddling two paths on the road to innovation and transformation into digital enterprises. The first path is the heritage trail – with “legacy” technology forming the background. Here, extant technologies are transformed by core IT teams to provide more API-driven approaches. Legacy systems can restrict companies that are transitioning into digital enterprises. To truly become a lea...
Sep. 28, 2016 08:15 PM EDT Reads: 359
IoT is fundamentally transforming the auto industry, turning the vehicle into a hub for connected services, including safety, infotainment and usage-based insurance. Auto manufacturers – and businesses across all verticals – have built an entire ecosystem around the Connected Car, creating new customer touch points and revenue streams. In his session at @ThingsExpo, Macario Namie, Head of IoT Strategy at Cisco Jasper, will share real-world examples of how IoT transforms the car from a static p...
Sep. 28, 2016 07:00 PM EDT Reads: 1,631
Cloud computing is being adopted in one form or another by 94% of enterprises today. Tens of billions of new devices are being connected to The Internet of Things. And Big Data is driving this bus. An exponential increase is expected in the amount of information being processed, managed, analyzed, and acted upon by enterprise IT. This amazing is not part of some distant future - it is happening today. One report shows a 650% increase in enterprise data by 2020. Other estimates are even higher....
Sep. 28, 2016 06:45 PM EDT Reads: 4,156
From wearable activity trackers to fantasy e-sports, data and technology are transforming the way athletes train for the game and fans engage with their teams. In his session at @ThingsExpo, will present key data findings from leading sports organizations San Francisco 49ers, Orlando Magic NBA team. By utilizing data analytics these sports orgs have recognized new revenue streams, doubled its fan base and streamlined costs at its stadiums. John Paul is the CEO and Founder of VenueNext. Prior ...
Sep. 28, 2016 06:30 PM EDT Reads: 3,133
One of biggest questions about Big Data is “How do we harness all that information for business use quickly and effectively?” Geographic Information Systems (GIS) or spatial technology is about more than making maps, but adding critical context and meaning to data of all types, coming from all different channels – even sensors. In his session at @ThingsExpo, William (Bill) Meehan, director of utility solutions for Esri, will take a closer look at the current state of spatial technology and ar...
Sep. 28, 2016 06:15 PM EDT Reads: 321