|By Marten Terpstra||
|May 2, 2014 11:15 AM EDT||
In reviewing some opportunities for Plexxi this week, I was reminded that we have made things very hard on ourselves. Through no one’s fault but our own we have created monsters of networks that are impossible to maintain, debug, diagnose and understand.
I have been lucky in my career. Most of it has been in an R&D organization for a large network vendor, but always in positions where I was close to customers, close to customer networks, and of course with that comes the “close to customer networks that are not working well”. And while there are always exceptions, in most of these troublesome networks, the sheer complexity of the network contributed significantly to the problem at hand, even if the end result was a bug.
Finding and fixing issues in networks is often one of these activities where you spent almost half your time understanding the network and its intricacies, a quarter of the time debugging and diagnosing the actual problem, and a last quarter producing, testing and implementing the solution. And so often the problem is hidden in the understanding of the network. An additional link that was not documented. A spanning tree config that was slightly different on one switch. A LAG with slightly different LACP timers. One vendor’s version of MLAG behaving just slightly different than another. And the guy that configured it no longer works here.
Whether it is a support person hunting for a problem, or a sales engineer trying to propose a new design or product, the process always almost starts with pictures. Network diagrams are the most powerful thing we produce. They are also the most misleading piece of information we produce because without fail they are wrong. Or missing something that is really important for that one specific item you are chasing. Network engineers and architects love to draw, our world exists of boxes, circles and lines between them. The challenge is that a 2 dimensional representation of a network is always going to be abstracted and therefore will always miss something. A network diagram that articulates the overall architecture and design of a network is absolutely key and with a clean sheet of paper we always start out with something that is sensible, easy to understand and typically simple. And then weeks, months and even years of incremental needs and requirements start eating away at the clean design.
Over 20 years of networking have created an astounding amount of capabilities. What we have taught our switches and routers to do is really amazing, and our packet forwarding chip vendors have done an equally outstanding job keeping up pushing these capabilities into hardware. And lots of these capabilities slowly make it into your network, chipping away at what was the “perfect” architecture. In the end, we are configuring individual devices with endless amounts of functions. Functions that should be so simple you should not have to configure them by hand.
We all know that ethernet networks need to be loop free. It should be dreadfully simple to instruct your devices to “make it so”. Except that we have at least five ways to ensure it is loop free. And then only for a specific portion of the network. We all know VoIP traffic should get preferred treatment over regular internet or other traffic. But in the end we configure complicated access lists and mappings to DSCP values that then map into queues that then have to be hand crafted into a scheduling mechanism we believe does not mess up the original voice traffic we cared about, or the other important traffic. We know routers needs to exchange subnet information for reachability. But we end up with rather complicated protocols that have endless options, some apply globally, some to interfaces, some need filtering, some need adjusted timers, you name it.
Your equipment vendor will tell you that there will be bugs. A switch or router is no different than a regular application, there are millions of lines of code and bug free code does not exist. We as vendors need to help the network architect, manager and operator. We have to make it much easier to implement the functionality you require. You can help yourself by uncluttering your network as a regular activity. Think back to those pristine network diagrams you created before the network was installed. Instead of adjusting the diagram to represent reality, perhaps it is worth spending some time adjusting the network back to the diagram.
[Today's fun fact: there is an actual website where you can submit network diagrams to be rated by the viewing public. Really. http://www.ratemynetworkdiagram.com]
Today air travel is a minefield of delays, hassles and customer disappointment. Airlines struggle to revitalize the experience. GE and M2Mi will demonstrate practical examples of how IoT solutions are helping airlines bring back personalization, reduce trip time and improve reliability. In their session at @ThingsExpo, Shyam Varan Nath, Principal Architect with GE, and Dr. Sarah Cooper, M2Mi’s VP Business Development and Engineering, explored the IoT cloud-based platform technologies driving this change including privacy controls, data transparency and integration of real time context with p...
Nov. 29, 2015 06:00 PM EST Reads: 440
The Internet of Things (IoT) is growing rapidly by extending current technologies, products and networks. By 2020, Cisco estimates there will be 50 billion connected devices. Gartner has forecast revenues of over $300 billion, just to IoT suppliers. Now is the time to figure out how you’ll make money – not just create innovative products. With hundreds of new products and companies jumping into the IoT fray every month, there’s no shortage of innovation. Despite this, McKinsey/VisionMobile data shows "less than 10 percent of IoT developers are making enough to support a reasonably sized team....
Nov. 29, 2015 02:00 PM EST Reads: 485
Just over a week ago I received a long and loud sustained applause for a presentation I delivered at this year’s Cloud Expo in Santa Clara. I was extremely pleased with the turnout and had some very good conversations with many of the attendees. Over the next few days I had many more meaningful conversations and was not only happy with the results but also learned a few new things. Here is everything I learned in those three days distilled into three short points.
Nov. 29, 2015 01:00 PM EST Reads: 354
DevOps is about increasing efficiency, but nothing is more inefficient than building the same application twice. However, this is a routine occurrence with enterprise applications that need both a rich desktop web interface and strong mobile support. With recent technological advances from Isomorphic Software and others, rich desktop and tuned mobile experiences can now be created with a single codebase – without compromising functionality, performance or usability. In his session at DevOps Summit, Charles Kendrick, CTO and Chief Architect at Isomorphic Software, demonstrated examples of com...
Nov. 29, 2015 12:45 PM EST Reads: 421
As organizations realize the scope of the Internet of Things, gaining key insights from Big Data, through the use of advanced analytics, becomes crucial. However, IoT also creates the need for petabyte scale storage of data from millions of devices. A new type of Storage is required which seamlessly integrates robust data analytics with massive scale. These storage systems will act as “smart systems” provide in-place analytics that speed discovery and enable businesses to quickly derive meaningful and actionable insights. In his session at @ThingsExpo, Paul Turner, Chief Marketing Officer at...
Nov. 29, 2015 12:30 PM EST Reads: 427
In his keynote at @ThingsExpo, Chris Matthieu, Director of IoT Engineering at Citrix and co-founder and CTO of Octoblu, focused on building an IoT platform and company. He provided a behind-the-scenes look at Octoblu’s platform, business, and pivots along the way (including the Citrix acquisition of Octoblu).
Nov. 29, 2015 12:00 PM EST Reads: 528
In his General Session at 17th Cloud Expo, Bruce Swann, Senior Product Marketing Manager for Adobe Campaign, explored the key ingredients of cross-channel marketing in a digital world. Learn how the Adobe Marketing Cloud can help marketers embrace opportunities for personalized, relevant and real-time customer engagement across offline (direct mail, point of sale, call center) and digital (email, website, SMS, mobile apps, social networks, connected objects).
Nov. 29, 2015 11:45 AM EST Reads: 328
The Internet of Everything is re-shaping technology trends–moving away from “request/response” architecture to an “always-on” Streaming Web where data is in constant motion and secure, reliable communication is an absolute necessity. As more and more THINGS go online, the challenges that developers will need to address will only increase exponentially. In his session at @ThingsExpo, Todd Greene, Founder & CEO of PubNub, exploreed the current state of IoT connectivity and review key trends and technology requirements that will drive the Internet of Things from hype to reality.
Nov. 29, 2015 09:45 AM EST Reads: 453
Two weeks ago (November 3-5), I attended the Cloud Expo Silicon Valley as a speaker, where I presented on the security and privacy due diligence requirements for cloud solutions. Cloud security is a topical issue for every CIO, CISO, and technology buyer. Decision-makers are always looking for insights on how to mitigate the security risks of implementing and using cloud solutions. Based on the presentation topics covered at the conference, as well as the general discussions heard between sessions, I wanted to share some of my observations on emerging trends. As cyber security serves as a fou...
Nov. 29, 2015 09:15 AM EST Reads: 346
We all know that data growth is exploding and storage budgets are shrinking. Instead of showing you charts on about how much data there is, in his General Session at 17th Cloud Expo, Scott Cleland, Senior Director of Product Marketing at HGST, showed how to capture all of your data in one place. After you have your data under control, you can then analyze it in one place, saving time and resources.
Nov. 29, 2015 08:45 AM EST Reads: 227
With all the incredible momentum behind the Internet of Things (IoT) industry, it is easy to forget that not a single CEO wakes up and wonders if “my IoT is broken.” What they wonder is if they are making the right decisions to do all they can to increase revenue, decrease costs, and improve customer experience – effectively the same challenges they have always had in growing their business. The exciting thing about the IoT industry is now these decisions can be better, faster, and smarter. Now all corporate assets – people, objects, and spaces – can share information about themselves and thei...
Nov. 29, 2015 08:00 AM EST Reads: 277
The cloud. Like a comic book superhero, there seems to be no problem it can’t fix or cost it can’t slash. Yet making the transition is not always easy and production environments are still largely on premise. Taking some practical and sensible steps to reduce risk can also help provide a basis for a successful cloud transition. A plethora of surveys from the likes of IDG and Gartner show that more than 70 percent of enterprises have deployed at least one or more cloud application or workload. Yet a closer inspection at the data reveals less than half of these cloud projects involve production...
Nov. 29, 2015 07:00 AM EST Reads: 499
Continuous processes around the development and deployment of applications are both impacted by -- and a benefit to -- the Internet of Things trend. To help better understand the relationship between DevOps and a plethora of new end-devices and data please welcome Gary Gruver, consultant, author and a former IT executive who has led many large-scale IT transformation projects, and John Jeremiah, Technology Evangelist at Hewlett Packard Enterprise (HPE), on Twitter at @j_jeremiah. The discussion is moderated by me, Dana Gardner, Principal Analyst at Interarbor Solutions.
Nov. 29, 2015 06:45 AM EST Reads: 743
Discussions of cloud computing have evolved in recent years from a focus on specific types of cloud, to a world of hybrid cloud, and to a world dominated by the APIs that make today's multi-cloud environments and hybrid clouds possible. In this Power Panel at 17th Cloud Expo, moderated by Conference Chair Roger Strukhoff, panelists addressed the importance of customers being able to use the specific technologies they need, through environments and ecosystems that expose their APIs to make true change and transformation possible.
Nov. 29, 2015 06:00 AM EST Reads: 558
Too often with compelling new technologies market participants become overly enamored with that attractiveness of the technology and neglect underlying business drivers. This tendency, what some call the “newest shiny object syndrome” is understandable given that virtually all of us are heavily engaged in technology. But it is also mistaken. Without concrete business cases driving its deployment, IoT, like many other technologies before it, will fade into obscurity.
Nov. 29, 2015 06:00 AM EST Reads: 377
Microservices are a very exciting architectural approach that many organizations are looking to as a way to accelerate innovation. Microservices promise to allow teams to move away from monolithic "ball of mud" systems, but the reality is that, in the vast majority of organizations, different projects and technologies will continue to be developed at different speeds. How to handle the dependencies between these disparate systems with different iteration cycles? Consider the "canoncial problem" in this scenario: microservice A (releases daily) depends on a couple of additions to backend B (re...
Nov. 29, 2015 05:00 AM EST Reads: 461
The Internet of Things is clearly many things: data collection and analytics, wearables, Smart Grids and Smart Cities, the Industrial Internet, and more. Cool platforms like Arduino, Raspberry Pi, Intel's Galileo and Edison, and a diverse world of sensors are making the IoT a great toy box for developers in all these areas. In this Power Panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, panelists discussed what things are the most important, which will have the most profound effect on the world, and what should we expect to see over the next couple of years.
Nov. 29, 2015 04:30 AM EST Reads: 487
Container technology is shaping the future of DevOps and it’s also changing the way organizations think about application development. With the rise of mobile applications in the enterprise, businesses are abandoning year-long development cycles and embracing technologies that enable rapid development and continuous deployment of apps. In his session at DevOps Summit, Kurt Collins, Developer Evangelist at Built.io, examined how Docker has evolved into a highly effective tool for application delivery by allowing increasingly popular Mobile Backend-as-a-Service (mBaaS) platforms to quickly crea...
Nov. 29, 2015 04:00 AM EST Reads: 378
Growth hacking is common for startups to make unheard-of progress in building their business. Career Hacks can help Geek Girls and those who support them (yes, that's you too, Dad!) to excel in this typically male-dominated world. Get ready to learn the facts: Is there a bias against women in the tech / developer communities? Why are women 50% of the workforce, but hold only 24% of the STEM or IT positions? Some beginnings of what to do about it! In her Day 2 Keynote at 17th Cloud Expo, Sandy Carter, IBM General Manager Cloud Ecosystem and Developers, and a Social Business Evangelist, wil...
Nov. 29, 2015 03:00 AM EST Reads: 598
PubNub has announced the release of BLOCKS, a set of customizable microservices that give developers a simple way to add code and deploy features for realtime apps.PubNub BLOCKS executes business logic directly on the data streaming through PubNub’s network without splitting it off to an intermediary server controlled by the customer. This revolutionary approach streamlines app development, reduces endpoint-to-endpoint latency, and allows apps to better leverage the enormous scalability of PubNub’s Data Stream Network.
Nov. 29, 2015 03:00 AM EST Reads: 340