|By Michael Bushong||
|May 14, 2014 09:00 AM EDT||
For many SDN and DevOps enthusiasts, the natural outcome of this wave of technological change is a highly-automated network that is well-orchestrated with surrounding systems and applications. One of the prevailing thoughts is that this level of automation is a well-formed abstraction layer. With the abstractions in place, the army of network engineers will be unencumbered by device configuration, and automation will ensure.
Or will it?
First off, let me say that abstraction is absolutely necessary. There is no doubt that networking will only advance if we can both remove unnecessary elements and simplify those that remain. We have to accomplish this in a way that is vendor (and ideally technology) agnostic. Abstraction is clearly the path forward.
But will abstraction necessarily lead to automation?
For the vast majority of network engineers who are designing and actively managing networks today, automation means writing shell or Perl scripts. The scripts themselves qualify as automation insofar as they remove keystrokes, but they basically execute the same serial logic that has dominated networking devices for decades.
When you want to make a switch or a router do something, you specify some configuration. Then you specify some other configuration. And again and again until you get through the litany of parameters that collectively make the device work. This workflow is so ingrained in our collective psyche that we inherently serialize the tasks required to make the network work.
There have actually been companies that have done a decent job of breaking the habit of serialized configuration. Juniper’s flagship operating system Junos moved to a more code-like representation of configuration, making no assumptions about the ordering of specific tasks. But our training runs deep, and even the Juniper guys will tell you that the biggest barrier to entry is familiarity with the UI.
We are addicted to our serialized behavior.
One of the side effects of highly-serialized configuration is that we tend to think extremely linearly and transactionally. There are a lot of network engineers for whom any kind of object-oriented approach is almost too foreign to really embrace. So when they try to automate tasks, they fall back into a sequencing of steps, repeated as many times as necessary. Automation without reuse is painfully difficult to propagate beyond only the most repetitive tasks.
And so we end up in a scenario where automation is basically synonymous with scripting, and where the value is largely applied only to the most frequently-executed tasks.
Where could automation take us?
If we think through where automation could take us, we ideally aim a little higher. Automation could mean the automated exchange of data between collaborative systems in support of some task. For instance, you might want your servers to communicate to your network so that when a new application is spun up (or a VM moves), you get corresponding policy changes, firewall or load balancer changes, and potentially network capacity allocation.
For most network engineers, the idea that infrastructure communicates and dynamically provides a service is science fiction. Our serialized mode of operation simply doesn’t support this kind of multilateral communication. Even if the abstractions remove some of the configuration complexity, the mental block is around sequencing.
If the current networking model has taught us anything, it should be that our network engineers are quite capable of managing tons of inputs and outputs. Now, whether that ought to be a requirement for the job is another question entirely. But as a group, network engineers are certainly capable of handling a lot of variables. That abstraction reduces these variables to the most meaningful is very interesting, but it wouldn’t seem that input management is the biggest bottleneck to automation.
The barrier to automation
Rather, the biggest barrier to automation is that workflow is so structured. First, it was the devices themselves that forced the structure. Then it was the processes (ITIL anyone?) that forced it. The end result is that we have built a discipline so dependent on structure that it actually impedes our own progress.
If we want to get to automation, we need to find a way to work around—or perhaps work within—this structure.
What we are really talking about is changing how we think about provisioning and managing a network. Why do you think there is so much angst when people talk about network engineers needing to learn to code? It’s because moving from a serialized set of steps to an object-oriented way of thinking about the problem is extremely difficult.
People aren’t pushing back because learning a new language is hard. Or at least they shouldn’t be. Look at any networking device configuration and tell me that you aren’t already a master coder. The biggest difference is that you you are using an interpreted language called Cisco CLI (or Junos CLI or whatever CLI).
What we need to do is bite off small (dare I say tiny) workflow elements, automate those, and then string them together into larger workflows. This implies a couple of things. First, we need to think less about discrete capabilities and more about how they exist within some broader workflow context. Second, we need to understand how these building blocks fit together. It’s the connecting of individual workflows that forms the basis for automation, and those connections highlight the pieces of information that flow across workflow boundaries.
More bluntly, the data that stitches together workflows ends up being the stuff that needs to be in an abstraction. It very well could be that getting the automation parts right will help us get to better abstractions.
Obviously we have to work the process from both ends – abstraction down, and workflow up. I don’t think it’s as simple as one or the other, which is why abstraction and automation might be a networking incarnation of the age-old chicken-and-egg question.
[Today’s fun fact: A parrot’s vocabulary is generally no more than twenty words. Who knew parrot’s and politicians had so much in common?]
As organizations realize the scope of the Internet of Things, gaining key insights from Big Data, through the use of advanced analytics, becomes crucial. However, IoT also creates the need for petabyte scale storage of data from millions of devices. A new type of Storage is required which seamlessly integrates robust data analytics with massive scale. These storage systems will act as “smart systems” provide in-place analytics that speed discovery and enable businesses to quickly derive meaningful and actionable insights. In his session at @ThingsExpo, Paul Turner, Chief Marketing Officer at...
Nov. 30, 2015 01:45 PM EST Reads: 431
DevOps is about increasing efficiency, but nothing is more inefficient than building the same application twice. However, this is a routine occurrence with enterprise applications that need both a rich desktop web interface and strong mobile support. With recent technological advances from Isomorphic Software and others, rich desktop and tuned mobile experiences can now be created with a single codebase – without compromising functionality, performance or usability. In his session at DevOps Summit, Charles Kendrick, CTO and Chief Architect at Isomorphic Software, demonstrated examples of com...
Nov. 30, 2015 01:45 PM EST Reads: 426
Most of the IoT Gateway scenarios involve collecting data from machines/processing and pushing data upstream to cloud for further analytics. The gateway hardware varies from Raspberry Pi to Industrial PCs. The document states the process of allowing deploying polyglot data pipelining software with the clear notion of supporting immutability. In his session at @ThingsExpo, Shashank Jain, a development architect for SAP Labs, discussed the objective, which is to automate the IoT deployment process from development to production scenarios using Docker containers.
Nov. 30, 2015 01:12 PM EST
In his keynote at @ThingsExpo, Chris Matthieu, Director of IoT Engineering at Citrix and co-founder and CTO of Octoblu, focused on building an IoT platform and company. He provided a behind-the-scenes look at Octoblu’s platform, business, and pivots along the way (including the Citrix acquisition of Octoblu).
Nov. 30, 2015 01:00 PM EST Reads: 536
In his General Session at 17th Cloud Expo, Bruce Swann, Senior Product Marketing Manager for Adobe Campaign, explored the key ingredients of cross-channel marketing in a digital world. Learn how the Adobe Marketing Cloud can help marketers embrace opportunities for personalized, relevant and real-time customer engagement across offline (direct mail, point of sale, call center) and digital (email, website, SMS, mobile apps, social networks, connected objects).
Nov. 30, 2015 12:45 PM EST Reads: 342
Countless business models have spawned from the IaaS industry – resell Web hosting, blogs, public cloud, and on and on. With the overwhelming amount of tools available to us, it's sometimes easy to overlook that many of them are just new skins of resources we've had for a long time. In his general session at 17th Cloud Expo, Harold Hannon, Sr. Software Architect at SoftLayer, an IBM Company, broke down what we have to work with, discussed the benefits and pitfalls and how we can best use them to design hosted applications.
Nov. 30, 2015 11:45 AM EST
The Internet of Everything is re-shaping technology trends–moving away from “request/response” architecture to an “always-on” Streaming Web where data is in constant motion and secure, reliable communication is an absolute necessity. As more and more THINGS go online, the challenges that developers will need to address will only increase exponentially. In his session at @ThingsExpo, Todd Greene, Founder & CEO of PubNub, exploreed the current state of IoT connectivity and review key trends and technology requirements that will drive the Internet of Things from hype to reality.
Nov. 30, 2015 10:45 AM EST Reads: 462
Two weeks ago (November 3-5), I attended the Cloud Expo Silicon Valley as a speaker, where I presented on the security and privacy due diligence requirements for cloud solutions. Cloud security is a topical issue for every CIO, CISO, and technology buyer. Decision-makers are always looking for insights on how to mitigate the security risks of implementing and using cloud solutions. Based on the presentation topics covered at the conference, as well as the general discussions heard between sessions, I wanted to share some of my observations on emerging trends. As cyber security serves as a fou...
Nov. 30, 2015 10:30 AM EST Reads: 353
With all the incredible momentum behind the Internet of Things (IoT) industry, it is easy to forget that not a single CEO wakes up and wonders if “my IoT is broken.” What they wonder is if they are making the right decisions to do all they can to increase revenue, decrease costs, and improve customer experience – effectively the same challenges they have always had in growing their business. The exciting thing about the IoT industry is now these decisions can be better, faster, and smarter. Now all corporate assets – people, objects, and spaces – can share information about themselves and thei...
Nov. 30, 2015 10:00 AM EST Reads: 290
The cloud. Like a comic book superhero, there seems to be no problem it can’t fix or cost it can’t slash. Yet making the transition is not always easy and production environments are still largely on premise. Taking some practical and sensible steps to reduce risk can also help provide a basis for a successful cloud transition. A plethora of surveys from the likes of IDG and Gartner show that more than 70 percent of enterprises have deployed at least one or more cloud application or workload. Yet a closer inspection at the data reveals less than half of these cloud projects involve production...
Nov. 30, 2015 09:00 AM EST Reads: 506
Discussions of cloud computing have evolved in recent years from a focus on specific types of cloud, to a world of hybrid cloud, and to a world dominated by the APIs that make today's multi-cloud environments and hybrid clouds possible. In this Power Panel at 17th Cloud Expo, moderated by Conference Chair Roger Strukhoff, panelists addressed the importance of customers being able to use the specific technologies they need, through environments and ecosystems that expose their APIs to make true change and transformation possible.
Nov. 30, 2015 08:00 AM EST Reads: 565
Microservices are a very exciting architectural approach that many organizations are looking to as a way to accelerate innovation. Microservices promise to allow teams to move away from monolithic "ball of mud" systems, but the reality is that, in the vast majority of organizations, different projects and technologies will continue to be developed at different speeds. How to handle the dependencies between these disparate systems with different iteration cycles? Consider the "canoncial problem" in this scenario: microservice A (releases daily) depends on a couple of additions to backend B (re...
Nov. 30, 2015 07:00 AM EST Reads: 468
Too often with compelling new technologies market participants become overly enamored with that attractiveness of the technology and neglect underlying business drivers. This tendency, what some call the “newest shiny object syndrome” is understandable given that virtually all of us are heavily engaged in technology. But it is also mistaken. Without concrete business cases driving its deployment, IoT, like many other technologies before it, will fade into obscurity.
Nov. 30, 2015 07:00 AM EST Reads: 382
Container technology is shaping the future of DevOps and it’s also changing the way organizations think about application development. With the rise of mobile applications in the enterprise, businesses are abandoning year-long development cycles and embracing technologies that enable rapid development and continuous deployment of apps. In his session at DevOps Summit, Kurt Collins, Developer Evangelist at Built.io, examined how Docker has evolved into a highly effective tool for application delivery by allowing increasingly popular Mobile Backend-as-a-Service (mBaaS) platforms to quickly crea...
Nov. 30, 2015 06:00 AM EST Reads: 388
The Internet of Things is clearly many things: data collection and analytics, wearables, Smart Grids and Smart Cities, the Industrial Internet, and more. Cool platforms like Arduino, Raspberry Pi, Intel's Galileo and Edison, and a diverse world of sensors are making the IoT a great toy box for developers in all these areas. In this Power Panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, panelists discussed what things are the most important, which will have the most profound effect on the world, and what should we expect to see over the next couple of years.
Nov. 30, 2015 05:30 AM EST Reads: 494
Growth hacking is common for startups to make unheard-of progress in building their business. Career Hacks can help Geek Girls and those who support them (yes, that's you too, Dad!) to excel in this typically male-dominated world. Get ready to learn the facts: Is there a bias against women in the tech / developer communities? Why are women 50% of the workforce, but hold only 24% of the STEM or IT positions? Some beginnings of what to do about it! In her Day 2 Keynote at 17th Cloud Expo, Sandy Carter, IBM General Manager Cloud Ecosystem and Developers, and a Social Business Evangelist, wil...
Nov. 30, 2015 04:00 AM EST Reads: 608
PubNub has announced the release of BLOCKS, a set of customizable microservices that give developers a simple way to add code and deploy features for realtime apps.PubNub BLOCKS executes business logic directly on the data streaming through PubNub’s network without splitting it off to an intermediary server controlled by the customer. This revolutionary approach streamlines app development, reduces endpoint-to-endpoint latency, and allows apps to better leverage the enormous scalability of PubNub’s Data Stream Network.
Nov. 30, 2015 04:00 AM EST Reads: 350
Apps and devices shouldn't stop working when there's limited or no network connectivity. Learn how to bring data stored in a cloud database to the edge of the network (and back again) whenever an Internet connection is available. In his session at 17th Cloud Expo, Ben Perlmutter, a Sales Engineer with IBM Cloudant, demonstrated techniques for replicating cloud databases with devices in order to build offline-first mobile or Internet of Things (IoT) apps that can provide a better, faster user experience, both offline and online. The focus of this talk was on IBM Cloudant, Apache CouchDB, and ...
Nov. 30, 2015 03:45 AM EST Reads: 440
I recently attended and was a speaker at the 4th International Internet of @ThingsExpo at the Santa Clara Convention Center. I also had the opportunity to attend this event last year and I wrote a blog from that show talking about how the “Enterprise Impact of IoT” was a key theme of last year’s show. I was curious to see if the same theme would still resonate 365 days later and what, if any, changes I would see in the content presented.
Nov. 30, 2015 02:00 AM EST Reads: 451
Today air travel is a minefield of delays, hassles and customer disappointment. Airlines struggle to revitalize the experience. GE and M2Mi will demonstrate practical examples of how IoT solutions are helping airlines bring back personalization, reduce trip time and improve reliability. In their session at @ThingsExpo, Shyam Varan Nath, Principal Architect with GE, and Dr. Sarah Cooper, M2Mi’s VP Business Development and Engineering, explored the IoT cloud-based platform technologies driving this change including privacy controls, data transparency and integration of real time context with p...
Nov. 30, 2015 02:00 AM EST Reads: 449