|By Toddy Mladenov||
|June 4, 2014 03:07 AM EDT||
Experiencing downtime is not something that companies wish for but as we have seen lately it is something that we hear quite often about. Interestingly enough very few enterprises, especially in the Small and Medium Business area, spent enough time to work out good procedures for recovery of their IT systems and applications. The recovery procedures should always be driven by the business needs, and this is the part where lot of IT departments are failing and as a result the recovery turns out to be reactive procedure that is triggered by the issue, results in a chaotic recovery activities and ends up with post-mortem but no improvements after that. Putting more initial thought into the Business Impact Analysis (BIA) is a prerequisite for a good recovery procedures and defining the two main characteristics - RTO and RPO are crucial part of this process.
Let's start with the first one - Recovery Time Objective (RTO). RTO is defined as the duration of time within which the system or the service must be restored after disruption in order to avoid unacceptable consequences related to break in business continuity. The first thing that you need to have in mind about RTO is that it is an objective - this means that it is a target that you may not be able to achieve all the time. There are certain activities that you need to do during this time that may have variable duration. At a high level those are grouped in:
- Recognizing that there is a disruption - this may depend on your level of monitoring or lack of it and may involve manual checking of each system or service that participates in the business process
- Troubleshooting and identifying the failing system and/or service - this will depend on the level of diagnostics you have implemented and may also involve different people or teams
- Fixing the issue - depending on the root cause this can be as simple as rebooting the system to as complex as requiting code changes or even ordering new hardware
- Testing the fix - last but not least you need to make sure that the fix actually resolves the issue
In all those four activities the human factor is the most variable part. People need to be notified, updated, they need time to understand the issue, troubleshoot, code etc. The more automation you provide the less impactful the human factor is for the recovery time.
Once the system or services is brought back to operation though you need to determine what is the state of the data. This is where the next characteristic becomes important - Recovery Point Objective (RPO). RPO is defined as the period in which data might be lost from the system due to disruption without major impact to the business continuity. Although this is also objective you need to be more careful with this one. There are few things to think about here:
- Is data loss acceptable at all? In lot of cases the answer is no but there are situations in which you can tolerate loss of data.
- How to recover the data? Does it require copying, shipping backup tapes or manual entry of the data?
- How long will it take to recover the data? Two extremes are from few seconds required to repoint the system to a replica of the data on another server to requesting an off-site backup copy of the data
- How to test that the data is recovered? This can vary from automated tests to manual tests
Depending on your RPO your time to recover the business operations for your system may vary.
When thinking about Business Continuity (BC) you need to think about both components - recovering the operation of the system or service (RTO) and recovering the data to a point at which it is usable for the business (RTO). Both those actions need to take time that is less than the Maximum Tolerable Downtime (MTD) as we defined it in Determining the Cost of Downtime. In general though you should set your RTO and RPO in a way that you have a buffer of time for unexpected issues that may occur during recovery.
This post was first published on our company's blog.
SYS-CON Events announced today that BMC will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. BMC delivers software solutions that help IT transform digital enterprises for the ultimate competitive business advantage. BMC has worked with thousands of leading companies to create and deliver powerful IT management services. From mainframe to cloud to mobile, BMC pairs high-speed digital innovation with robust IT industrialization – allowing customers to provide amazing user experiences with optimized IT per...
May. 27, 2015 01:30 PM EDT Reads: 474
The world is at a tipping point where the technology, the device and global adoption are converging to such a point that we will see an explosion of a world where smartphone devices not only allow us to talk to each other, but allow for communication between everything – serving as a central hub from which we control our world – MediaTek is at the heart of both driving this and allowing the markets to drive this reality forward themselves. The next wave of consumer gadgets is here – smart, connected, and small. If your ambitions are big, so are ours. In his session at @ThingsExpo, Jack Hu, D...
May. 27, 2015 12:49 PM EDT Reads: 315
The 4th International Internet of @ThingsExpo, co-located with the 17th International Cloud Expo - to be held November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA - announces that its Call for Papers is open. The Internet of Things (IoT) is the biggest idea since the creation of the Worldwide Web more than 20 years ago.
May. 27, 2015 12:00 PM EDT Reads: 1,628
SYS-CON Events announced today that DragonGlass, an enterprise search platform, will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. After eleven years of designing and building custom applications, OpenCrowd has launched DragonGlass, a cloud-based platform that enables the development of search-based applications. These are a new breed of applications that utilize a search index as their backbone for data retrieval. They can easily adapt to new data sets and provide access to both structured and unstruc...
May. 27, 2015 12:00 PM EDT Reads: 1,828
SYS-CON Events announced today that MetraTech, now part of Ericsson, has been named “Silver Sponsor” of SYS-CON's 16th International Cloud Expo®, which will take place on June 9–11, 2015, at the Javits Center in New York, NY. Ericsson is the driving force behind the Networked Society- a world leader in communications infrastructure, software and services. Some 40% of the world’s mobile traffic runs through networks Ericsson has supplied, serving more than 2.5 billion subscribers.
May. 27, 2015 12:00 PM EDT Reads: 1,219
We’re entering a new era of computing technology that many are calling the Internet of Things (IoT). Machine to machine, machine to infrastructure, machine to environment, the Internet of Everything, the Internet of Intelligent Things, intelligent systems – call it what you want, but it’s happening, and its potential is huge. IoT is comprised of smart machines interacting and communicating with other machines, objects, environments and infrastructures. As a result, huge volumes of data are being generated, and that data is being processed into useful actions that can “command and control” thi...
May. 27, 2015 11:51 AM EDT Reads: 350
As the Internet of Things unfolds, mobile and wearable devices are blurring the line between physical and digital, integrating ever more closely with our interests, our routines, our daily lives. Contextual computing and smart, sensor-equipped spaces bring the potential to walk through a world that recognizes us and responds accordingly. We become continuous transmitters and receivers of data. In his session at @ThingsExpo, Andrew Bolwell, Director of Innovation for HP's Printing and Personal Systems Group, discussed how key attributes of mobile technology – touch input, sensors, social, and ...
May. 27, 2015 11:30 AM EDT Reads: 3,918
All major researchers estimate there will be tens of billions devices - computers, smartphones, tablets, and sensors - connected to the Internet by 2020. This number will continue to grow at a rapid pace for the next several decades. With major technology companies and startups seriously embracing IoT strategies, now is the perfect time to attend @ThingsExpo, June 9-11, 2015, at the Javits Center in New York City. Learn what is going on, contribute to the discussions, and ensure that your enterprise is as "IoT-Ready" as it can be
May. 27, 2015 11:15 AM EDT Reads: 1,994
The Internet of Things is not only adding billions of sensors and billions of terabytes to the Internet. It is also forcing a fundamental change in the way we envision Information Technology. For the first time, more data is being created by devices at the edge of the Internet rather than from centralized systems. What does this mean for today's IT professional? In this Power Panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, panelists will addresses this very serious issue of profound change in the industry.
May. 27, 2015 10:30 AM EDT Reads: 817
WebRTC defines no default signaling protocol, causing fragmentation between WebRTC silos. SIP and XMPP provide possibilities, but come with considerable complexity and are not designed for use in a web environment. In his session at @ThingsExpo, Matthew Hodgson, technical co-founder of the Matrix.org, discussed how Matrix is a new non-profit Open Source Project that defines both a new HTTP-based standard for VoIP & IM signaling and provides reference implementations.
May. 27, 2015 10:30 AM EDT Reads: 5,165
Buzzword alert: Microservices and IoT at a DevOps conference? What could possibly go wrong? In this Power Panel at DevOps Summit, moderated by Jason Bloomberg, the leading expert on architecting agility for the enterprise and president of Intellyx, panelists will peel away the buzz and discuss the important architectural principles behind implementing IoT solutions for the enterprise. As remote IoT devices and sensors become increasingly intelligent, they become part of our distributed cloud environment, and we must architect and code accordingly. At the very least, you'll have no problem fil...
May. 27, 2015 10:00 AM EDT Reads: 1,804
Almost everyone sees the potential of Internet of Things but how can businesses truly unlock that potential. The key will be in the ability to discover business insight in the midst of an ocean of Big Data generated from billions of embedded devices via Systems of Discover. Businesses will also need to ensure that they can sustain that insight by leveraging the cloud for global reach, scale and elasticity.
May. 27, 2015 09:30 AM EDT Reads: 6,568
"People are a lot more knowledgeable about APIs now. There are two types of people who work with APIs - IT people who want to use APIs for something internal and the product managers who want to do something outside APIs for people to connect to them," explained Roberto Medrano, Executive Vice President at SOA Software, in this SYS-CON.tv interview at Cloud Expo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
May. 27, 2015 09:30 AM EDT Reads: 4,255
In their session at @ThingsExpo, Shyam Varan Nath, Principal Architect at GE, and Ibrahim Gokcen, who leads GE's advanced IoT analytics, focused on the Internet of Things / Industrial Internet and how to make it operational for business end-users. Learn about the challenges posed by machine and sensor data and how to marry it with enterprise data. They also discussed the tips and tricks to provide the Industrial Internet as an end-user consumable service using Big Data Analytics and Industrial Cloud.
May. 27, 2015 07:30 AM EDT Reads: 5,502
Building low-cost wearable devices can enhance the quality of our lives. In his session at Internet of @ThingsExpo, Sai Yamanoor, Embedded Software Engineer at Altschool, provided an example of putting together a small keychain within a $50 budget that educates the user about the air quality in their surroundings. He also provided examples such as building a wearable device that provides transit or recreational information. He then reviewed the resources available to build wearable devices at home including open source hardware, the raw materials required and the options available to power s...
May. 27, 2015 04:30 AM EDT Reads: 3,985
How do APIs and IoT relate? The answer is not as simple as merely adding an API on top of a dumb device, but rather about understanding the architectural patterns for implementing an IoT fabric. There are typically two or three trends: Exposing the device to a management framework Exposing that management framework to a business centric logic Exposing that business layer and data to end users. This last trend is the IoT stack, which involves a new shift in the separation of what stuff happens, where data lives and where the interface lies. For instance, it's a mix of architectural styles ...
May. 27, 2015 03:00 AM EDT Reads: 5,733
We certainly live in interesting technological times. And no more interesting than the current competing IoT standards for connectivity. Various standards bodies, approaches, and ecosystems are vying for mindshare and positioning for a competitive edge. It is clear that when the dust settles, we will have new protocols, evolved protocols, that will change the way we interact with devices and infrastructure. We will also have evolved web protocols, like HTTP/2, that will be changing the very core of our infrastructures. At the same time, we have old approaches made new again like micro-services...
May. 27, 2015 02:30 AM EDT Reads: 5,354
Connected devices and the Internet of Things are getting significant momentum in 2014. In his session at Internet of @ThingsExpo, Jim Hunter, Chief Scientist & Technology Evangelist at Greenwave Systems, examined three key elements that together will drive mass adoption of the IoT before the end of 2015. The first element is the recent advent of robust open source protocols (like AllJoyn and WebRTC) that facilitate M2M communication. The second is broad availability of flexible, cost-effective storage designed to handle the massive surge in back-end data in a world where timely analytics is e...
May. 27, 2015 02:00 AM EDT Reads: 6,137
Collecting data in the field and configuring multitudes of unique devices is a time-consuming, labor-intensive process that can stretch IT resources. Horan & Bird [H&B], Australia’s fifth-largest Solar Panel Installer, wanted to automate sensor data collection and monitoring from its solar panels and integrate the data with its business and marketing systems. After data was collected and structured, two major areas needed to be addressed: improving developer workflows and extending access to a business application to multiple users (multi-tenancy). Docker, a container technology, was used to ...
May. 27, 2015 01:00 AM EDT Reads: 1,929
The true value of the Internet of Things (IoT) lies not just in the data, but through the services that protect the data, perform the analysis and present findings in a usable way. With many IoT elements rooted in traditional IT components, Big Data and IoT isn’t just a play for enterprise. In fact, the IoT presents SMBs with the prospect of launching entirely new activities and exploring innovative areas. CompTIA research identifies several areas where IoT is expected to have the greatest impact.
May. 26, 2015 09:00 PM EDT Reads: 4,854